Quasar CF-4251 Guía de instalación descargar pdf (Pagina 2)

CF-3211/CF-4221/CF-4251 Camera Connector Panel Terminals

Connector Name

Pin No./Connector Type

Definition

Description

Line Out

Audio out

Two-way audio transmission

Line In/Mic In

Audio in

PoE Network

RJ45, Network LEDs

10/100 Mbps

Ethernet/PoE

Power over Ethernet

Video

BNC

Analog video out

For video output

MicroSD card slot

For video storage (card not included)

DC 12V/AC 24V

1 - Power (+)

2 - Reserved

3 - GND (-)

12V DC

Power supply connection Indication (green LED)

1 - Power (+)

2 - Earth GND

3 - Power (-)

24V AC

I/O 1 to 7

1 - Output (+)

2 - Output (-)

Alarm output

Terminal connector block

3 - Input (+)

4 - Input (-)

Alarm input

5 - GND

Grounding

6 - D (-)

7 - D (+)

Reserved.

Do NOT connect

Auto Iris

DC Iris lens connector

DC iris port

Auto iris connector

PWR

N/A

Power LED

Power indication

RESET

N/A

Reset

Restores factory default settings

Adjusting and Framing-up the Camera View

1. Camera Access and Login:

Access the camera in one of the following ways:

a. If using the DNA application, click the DNA icon . In the Discover List, click to select the camera, right-click to open the

shortcut menu, and select Browse.

b. If using a web browser, enter the camera’s IP address as the URL.

2. Before logging into the camera:

A client program is installed automatically on a PC once it is connected to the camera. Before accessing the camera, ensure that

ActiveX controls can be downloaded by (a) changing the ActiveX controls and plug-in settings or (b) setting the Internet security

level to default. For further details, refer to the camera’s user manual.

ActiveX Controls and Plug-in Settings

Internet Security Level

1. Start Internet Explorer.

2. Select Tools from the main menu of the browser.

3. Click Internet Options.

4. Click the Security tab and select Internet.

5. Click Custom level to change ActiveX settings.

6. Set ActiveX controls and plug-ins items to Prompt

or Enable.

1. Start Internet Explorer.

2. Select Tools from the main browser menu.

3. Click Internet Options.

4. Click the Security tab and select Internet.

5. Page down, press Default Level. Click OK to confirm.

6. Close the browser window.

7. To access the camera, open a new browser window.

3. Camera Login:

The camera’s IP address is automatically supplied by the DHCP server. To access the camera for the first time, use the Configurator

application to change the camera’s IP address.

4. Login ID and Password:

a. Enter the camera’s IP address in the URL bar of the browser window and press the Enter key.

b. Enter the default user name (Admin) and password (1234).

NOTE: The user name is case-sensitive.

5. Install the ActiveX control:

a. After connecting camera, a request to install the ActiveX control appears below the URL bar.

b. Right-click on the information bar, and select Install ActiveX Control… to permit ActiveX control installation.

c. In the pop-up security warning window, click Install to start downloading the DC Viewer software onto the PC.

d. Click Finish when the DC Viewer installation is completed.

NOTE: Before accessing the camera, if you have previously installed the DVTEL Web Player (DCViewer) on the PC, use the Windows

Add/Remove program to uninstall the existing DCViewer from the PC. For more information, refer to the user’s manual.

Attach in Latitude

1. In the Latitude application, on the Sidebar click Physical View.

2. On the Navigation Tree click the System name.

3. Select the Discovery tab and do the following:

a. Under Cameras and Encoders, verify that

DVTEL HD Series is selected.

b. Click Start. The camera details appear in the

Discovery table.

c. If the camera wasn’t found after running Start,

click Discover Unit Manually.

d. In the dialog box that opens, enter the camera’s

IP address, select DVTEL HD Series, and click OK.

4. In the Discovery table, right-click the camera, select

Attach, and click the Archiver name to attach to.

5. When finished, click to save.

Models in the CF-3211/CF-4221/CF-4251 series:

Model Number

Description

CF-3211-00

CF-4221-00

CF-4251-00

Indoor camera with varifocal lens

CF-3211-01

CF-4221-01

Outdoor camera with varifocal lens

CF-3211-10

CF-4221-10

Indoor camera with motorized lens

CF-3211-10-I

CF-4221-10-I

Indoor camera with motorized lens and infrared IR illuminator

CF-3211-11

CF-4221-11

Outdoor camera with motorized lens

CF-3211-11-I

CF-4221-11-I

Outdoor camera with motorized lens and infrared IR illuminator

How to contact DVTEL:

North America: 1-888-DVTel77

Latin America: +52 555580 5618

EMEA: +44 (0) 1494 430240

APAC: +65 6389 1815

Hong Kong:

+852 3667 9295

India

: +91 (129) 431 5031

ANZ/Pacific

: +61 8 8235 9211

For assistance, email us at suppor[email protected] or visit http://www.dvtel.com/support.

1 2

Comentarios a estos manuales

Sin comentarios

Quasar CF-4251 Guía de instalación Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Quasar CF-4251